SPACE INTERFACE

Lo primero que hicimos fue coger el código inicial y hacer su montaje.

Tras esto lo modificamos para que se pudiera encender otro led. Código:

int switchstate = 0;

void setup(){

 // declare the LED pins as outputs

 pinMode(3,OUTPUT);

 pinMode(4,OUTPUT);

 pinMode(5,OUTPUT);

 pinMode(6,OUTPUT);

 // declare the switch pin as an input   

 pinMode(2,INPUT);

}

void loop(){

 // read the value of the switch

 // digitalRead() checks to see if there is voltage

 // on the pin or not  

 switchstate = digitalRead(2);

 // if the button is not pressed

 // turn on the green LED and off the red LEDs  

 if (switchstate == LOW) {

   digitalWrite(3, HIGH); // turn the green LED on pin 3 on

   digitalWrite(4, LOW);  // turn the red LED on pin 4 off

   digitalWrite(5, LOW);  // turn the red LED on pin 5 off

   digitalWrite(6,LOW);

 }

 // this else is part of the above if() statement.

 // if the switch is not LOW (the button is pressed)

 // turn off the green LED and blink alternatively the red LEDs

 else {

   digitalWrite(4,LOW);

   digitalWrite(6,HIGH);

   digitalWrite(5,LOW);

   // wait for a quarter second before changing the light

   delay(250);

   digitalWrite(4, LOW);  // turn the red LED on pin 4 off

   digitalWrite(5, HIGH); // turn the red LED on pin 5 on

   digitalWrite(6,LOW);

   // wait for a quarter second before changing the light

   delay(250);

   digitalWrite(4, HIGH); // turn the red LED on pin 4 on

   digitalWrite(5, LOW);  // turn the red LED on pin 5 off

   digitalWrite(6,LOW);

   // wait for a quarter second before changing the light

   delay(250);

 }

 }